Study plan

الهندسة الكهربائية والطاقة المتجددة

متطلبات الكلية الإجبارية Credit hours: 12 Courses: 4
Course No Course Name Credit hours Course Description
2001 Arabic Language 3 The Arabic language course is considered a fundamental requirement for the college of applied professions. The course aims to prepare students to communicate fluently in Arabic in their daily lives and academic work by providing them with basic practical knowledge and skills in Arabic language and its arts that are in line with their needs and knowledge. This will enable them to use it correctly in reading, writing, and speaking, reflecting positively on their performance and increasing their self-confidence and the confidence of others in them. The course includes lessons in grammar, morphology, and basic linguistic rules, as well as listening, speaking, reading, and writing exercises. Additionally, it also includes the study of common vocabulary and phrases in the Arabic language.
2002 English Language 3 The English language course aims to develop the four basic skills of the student, namely: writing, reading comprehension, correct pronunciation, and conversation. As well as focusing on written means of communication between people and different institutions, where the student will practice a set of written and read skills on messages, in addition to getting acquainted with other types of writings such as reports, advertisements, expressions, and other writings. As well as developing basic language grammar, which includes: basic verbs, direct speech, prepositions, the conditional sentence, quoted speech, demand and planning .... It also aims to provide the student with English words and terminology that are related to the student's daily and practical life and related to his direct specialization by providing him with related terms with his advanced courses by providing them from the teachers responsible for them. And writing technical reports in English, in addition to passing through a number of texts that add to the student a set of various meanings and terms.
3219 Entrepreneurship 3 This course aims to develop entrepreneurial skills among young people and prepare them at an academic level, not only to be able to create their own projects in the future, but also to work effectively in small and medium-sized enterprises. Thus, the overall goal of the course on a broader level is to contribute to the creation of an entrepreneurial culture in Palestine. The course is theoretical in nature, but also practical, using student-centered teaching methods to facilitate learning and achievement of goals through daily activities, games, and data interpretation
3720 Introduction in computer and networks 3 This course aims to identify the components of the computer, its various units, the classification of counting systems, the memory unit, the arithmetic and logic unit, the input and output unit, the operating system, and the basics of programming. In addition to learning about internet networks, how they work and programming, how a local network works between a group of devices, and the comparison between router, switch and hub.
متطلبات الكلية الإختيارية Credit hours: 1 Courses: 1
Course No Course Name Credit hours Course Description
2017 Physical Education 1 The physical activity course is designed to promote health and fitness and improve students' athletic skills. It includes various concepts and physical activities, including team sports such as soccer and basketball, and individual sports such as running, swimming, weightlifting, and yoga. In addition, the course emphasizes teamwork, collaboration, and challenge. It also focuses on committing to sports ethics and social responsibility, and learning about some of the injuries that can occur on and off the field, their causes, symptoms, and first aid methods.
متطلبات البرنامج Credit hours: 19 Courses: 9
Course No Course Name Credit hours Course Description
2005 Mathematics (1) 3 This course strengthens students’ understanding of functions like; polynomials, absolute value functions, greatest integer functions, trigonometric functions, exponential and logarithmic functions, in preparation for the process of differentiation and integration. Then students will extend their experience with functions as they study the fundamental concepts of calculus: limiting behaviors, continuity, the derivative by definition, the differentiation rules including chain rules and implicit differentiation. Finally this course covers basic ideas of integration; definite integral, anti-derivatives and indefinite integrals, the Fundamental Theorem of Calculus, and some integration's methods .
2007 Engineering Workshop 2 This course aims to introduce the student to the principles of manufacturing and proper handling of machines, equipment and various tools without falling or causing practical accidents inside the workshops, factories and various construction projects, and giving him the ability to know the processes necessary to complete a piece.
2011 Principles of Elect. Ciruits 3 The course covers such subjects as elements of current circuits, DC circuits, laws and theories of electric circuits, solution method of electric circuits, single phase alternating current, element of ac circuits, analysis of ac circuit, element of ac circuits, complex numbers, magnetism and electro magnetism, electromagnetism induction circuits, resonance circuits, three phase ac circuits.
2012 Principles of Elect. Circuits lab. 1 Experiments in electrical circuits basics; resistive circuits (series, parallel, compound), ohms law, superposition principle, thevenin’s, Norton theorems, and maximum power transfer. kirrshoff’s laws, application in ac circuits, frequency response of RL, RC and RLC circuits resonance circuit, transformer’s.
2013 Electronics I 2 Semiconductor theory, PN junction, diode circuit and applications, bipolar junction transistors (BJT) theory and biasing circuits , field effect transistors (FET), theory and biasing circuits , special purpose of solid state device thyristor, Triac and Diac.
2062 Project 2 The graduation project, as a requirement for students expected to graduate, aims to give the student an academic opportunity within which he can deepen his understanding of one or more aspects of his specialization, and try to achieve a constructive scientific addition, drawing on his academic achievement, his own abilities, and the capabilities of the university such as libraries, laboratories, workshops, teaching staff, and others.
2434 Field Training I 2 This course aims to enable the student to follow up on construction work in its various stages, and to gain practical experience through direct contact with the labor market.
2435 Field Training II 2 Through this course, the student work as a trainee in one of the companies or workshop in the electronics field; in maintenance of phones, electrical appliances, the maintenance departments of different companies , and biomedical devices maintenance
3704 Computer aided drawing 2 This course aims to introduce students to computerized drawing programs for engineering drawing operations and all the commands used in AutoCAD, in addition to drawing various engineering symbols and drawing electrical, mechanical and various industrial diagrams. This course also shows how to draw extensions and various electrical circuits .
متطلبات التخصص Credit hours: 36 Courses: 20
Course No Course Name Credit hours Course Description
2039 Electrical Machines II Lab 1 This course aims to identify the types of AC and DC electrical machines and how to draw its mechanical properties. Synchronous motors and generators are identified and how its work, and its electrical properties.
2052 Power Electronics Lab. 1 Giving the student some practical experience in examining and operating semiconductors used in industrial automation circuits such as diodes, transistors, thyristors, triacs and diacs, as well as transistors in the field. In addition to building some trigger circuits used in variable and direct current circuits, studying the most important thyristor extinguishing techniques, building single and three-phase unifying circuits, studying control systems in single and three-phase voltage regulators, studying some cutting circuits, inverter circuits and practical applications on thyristor uses.
2064 Electronics II Lab 1 Introducing the student to the practical applications of diodes, such as conversion circuits from alternating voltage to continuous voltage and transistor applications related to electronic circuits of amplifiers and oscillators of various types, and qualifying him with mathematical methods for analyzing electronic circuits, especially amplifiers, through the representation of electronic devices Circuit models for different frequencies.
2366 Electrical Machines and Transformers 3 This course aims to identify continuous electrical machines (motors and generators), characteristics , methods of speed controlling and external potential difference, identify alternating current machines (motors and generators), practical examples of them, and study electrical transformers used in electrical distribution systems.
2433 Power Electronics 2 Introduction to power electronics elements; power diodes, thyristors, triacs, diacs, and power transistors.studying the four main converters: rectifiers, inverters, ac voltage controllers, and dc choppers and the industrial applications of these converters.
3705 Introduction in renewable energy 3 This course aims to introduce the student to the types of renewable energy such as wind energy, solar energy, geothermal energy, gas extraction from farm waste, water energy, wave energy, tidal energy, etc., in addition to energy storage techniques .
3706 Electrical measurements and sensors 2 The global system of units of measurement, measurement errors, voltage and current transformers, wattmeters, power meters, constant and variable bridges current , the osilloscope and its applications, signal generators, solar radiation measuring devices, internal lighting intensity measuring devices, Devices measuring wind speed and direction.
3707 Electrical measurements and sensors lab 1 Familiarizing the student with electrical measurement errors, measuring different electrical quantities (volts, current, resistance, capacity), as well as measuring the power factor and ways to improve it from a practical point of view, measuring the electrical quantity (energy drawn) using electric meters - Measurement of resistances and impedances in direct and alternating bridges current , measurement of indoor lighting intensity, measurement of wind speed and direction, measurements of solar radiation.
3708 Occupational safety, health & the environment 1 The course aims to introduce students to the concept of professional ethics, within the framework of realizing legal and ethical responsibilities in professional work, the principles of public safety and the importance of adhering to them. The personal characteristics, capabilities and technical skills that must be available in the employee, the importance of maintaining the confidentiality of private information, how to deal with work pressures and emergencies situation.
3709 Photovoltaic systems technology 3 This course aims to introduce the student to the current technology and systems for using solar energy to generate electricity through photovoltaic cells of various types and using the sun to heat water through solar collectors and how to properly design and install these systems, in addition to designing a solar energy system (on grid, off grid).
3710 Photovoltaic systems lab 1 This course aims to study the electrical characteristics of the solar cell (drawing the relationship of current and voltage), as well as the effect of shade on the work and efficiency of solar cells, the effect of heat and wind speed on it, examining the power output from it, as well as the method of fixing the metal structures of the cells, then the method of connecting solar cells with inverters, batteries and controllers according to the attached diagram From the company, the laboratory also deals with identifying some malfunctions and the possibility of repairing them, as well as making the appropriate grounding for metal structures, and the method of examining and charging batteries.
3711 Electrical protection systems 2 Introducing the student to the dangers of electricity, ways to prevent it, and the use of various preventive systems and means to protect against electric shock. Learn about electrical circuit controls and ways to connect them.
3712 Electrical protection systems lab 1 The student conducts various practical experiments that simulate electric shock and means of prevention, and the use of various preventive means such as circuit breakers, electrical isolation, and the use of electrical isolation devices and isolation transformers. Applications on aggregate current transformers and their principle of operation. Conducting experiments on different grounding systems and identifying the characteristics of each type. Using insulation monitoring devices. Measurement of contact voltage, step voltage and resistance of ground electrons. Measure the resistivity of the soil. Conducting experiments on the connections of electrical circuit control elements for solar energy systems.
3713 Low voltage installations 2 This course aims to introduce students to the basics of designing and extending main and sub-variable current circuits in domestic and commercial buildings, calculating loads, lighting, and installing electrical panels, in addition to identifying the basics of extending direct current circuits.
3714 Electrical Drawings 2 This course aims to introduce students to simulation programs used in electrical systems, whether in transmission and distribution systems of electric energy or in solar energy systems such as ETAP, PVSYST.
3715 High voltage installations 2 Familiarize students with the components of electric power transmission and distribution systems and focus on medium voltage systems with their components and parts.
3716 Energy efficiency, rationalization and economics 2 Introducing the student to the concept and importance of energy conservation, administrative and educational procedures related to it and raising the efficiency of the use of devices, improving the power factor in transmission and distribution networks, the use and impact of harmonics and the quality of nutrition on the rationalization of energy consumption, the impact of improving the quality of energy on devices and equipment, energy demand management / load management Electricity, technical and commercial electrical losses, its causes and ways to reduce it, rationalization of consumption in lighting (high-efficiency lighting), the use of energy-saving devices, thermal insulation and its impact on rationalization of consumption and rationalization of consumption in air conditioning and refrigeration systems.
3717 Electrical grids workshop 2 A practical course aimed at providing students with the knowledge and skills necessary to operate and maintain electrical power distribution systems. And how to distribute electrical energy through power distribution and transmission networks, and how to identify potential problems and fix them in the event of a malfunction in these networks. And how to use the tools and techniques necessary to measure and analyze electrical data, such as ohmmeters, electric generators and electronic regulators, and how to operate the various electrical devices used.
3718 Supportive electrical systems 2 Classification of energy, its sources and exploitation. Basic principles for the most important types of batteries used in renewable energy systems. Indications for the use of batteries in solar and wind energy systems. Systems for the direct conversion of energy into electricity (electrical, thermal, photovoltaic, and fuel cells). Designing electrical energy storage systems. Design of backup power systems connected to the network
3719 Future trends in sustainable systems 2 the course focuses on analyzing the current electrical systems and their various sustainability challenges, as well as developing the necessary solutions and technologies to achieve sustainability in these systems.The course covers several topics and challenges related to sustainability in electrical systems, including understanding the basic concepts of sustainable development in electrical systems, such as improving energy efficiency and promoting the use of renewable energy.It also addresses the challenges of transitioning to renewable energy in electrical systems, such as the weakness of electrochemical storage and changes in transmission networks. The course also explores available solutions to achieve sustainability in electrical systems, such as energy storage technologies, load control technologies, and demand management. It studies policies and frameworks that can be used to achieve sustainability in electrical systems, such as government policies to encourage the use of renewable energy and reduce carbon emissions.
متطلبات التخصص الاختياري Credit hours: 3 Courses: 2
Course No Course Name Credit hours Course Description
2003 Studies in Arabic & Islamic Thought 3 This Course include Definition of Islamic thought, and merits, and its characteristics, and the campaign thought, and sources of thought, Arab and Islamic worlds, belief, worship, and ethics, Islamic regimes, Arab and Islamic civilization: its achievements.
2999 Anti - Corruption "Challenges & Solutions" 3 This course provides an in-depth knowledge of the concept of corruption globally and locally, and the complex forms it manifests in both formal and informal institutions alike. The course also discusses the most important factors that increase the likelihood of corruption emerging and spreading, whether those related to the structural organization of state institutions, or the political and social complexities that affect the work of these institutions and weaken their ability to combat this phenomenon. The course also deals with the most important strategic plans and the internationally recognized approaches to combating corruption. Learn about the national anti-corruption strategy